Nitrogen Generators
The cost-effective, reliable and safe solution for medium to large nitrogen requirements.
CompAir offers an ideal solution with a comprehensive range of cost effective nitrogen generator systems from compressed air, that enable users to produce their total demand for nitrogen gas on their premises and under their control.
Compared to traditional methods of supply, on-site nitrogen generator is exceptionally cost-efficient with a short payback time on investment - in many cases less than twelve months.
Share
What is a Nitrogen Generator and how does it work?
The air we breath is approximately 78 percent nitrogen and 21 percent oxygen, a small amounts of other gases, such as neon, and hydrogen make up the other 1%. A nitrogen generator is able to produce a continuous uninterrupted stream of nitrogen gas from clean dry compressed air. It uses a Carbon Molecular Sieve (CMS) bed where oxygen and other trace gases are preferentially adsorbed and the nitrogen is allowed to pass through.
CompAir nitrogen generators are available in 3 variations
Capacities range from 1 up to 1150 Nm3/hour from 95% to 99.9995% purity. CompAir PSA generators are designed for 24/7 operation. The touchscreen control has user-friendly interface with automatic start/stop function based on gas consumption. Our SEP and MultiSEP series have spring loaded columns which prevent the molecular sieve against a crushing effect.
The unique design provides consistent high flow rates of nitrogen with a minimum footprint. Together with molecular sieve protection from moisture to substantially lower the cost and extend the generators.
The features are your benefits:
- Robust Design with stainless steel piping
- Built-in purity analyser for constant monitoring
- Vessels designed for dynamic pressure loading
- Intuitive touch-screen control
- Remote start/stop relay
- Guaranteed performance with ASSURE warranty & remote monitoring
- Rapid ROI in typically less than 24 months
- Easy to install & environmentally-friendly
- Fits any application
Guaranteed performance
- 100% function and performance factory tested
- ASSURE warranty
Rapid return on investment
- Significant cost savings over cylinder or liquid supply provides a typical return on investment of less than 24 months
- Ecomode energy savings control reduces energy consumption during periods of low demand
Fits any application
- Maximum design operating pressure of 16 barg available design quality
- Mass flow controller - ensures correct application pressure and flow
- Integral oxygen analyser - continuously measures and guarantees gas quality
- Purity guarantee valve - automatically ensures gas meets desired specifications
- Remote monitoring - enables connection to proprietary remote management and generator control systems
The convenient and safe alternative
Nitrogen is used for a wide range of industrial applications including atmosphere packaging for perishable food products. It is also used in preventing fire and explosions in chemical plants. Using high quality compressed air to supply the generators, ensures long and trouble-free service and guarantees optimum performance.
CompAir has a comprehensive range of systems that include everything needed to set up an on-site nitrogen generation system. CompAir air compressors and pre-treatment packages include adsorption dryers and coalescing filters to guarantee the highest quality air supply for the generators. The gas can be produced from your existing system with a minimum of additional floor space.
Typical gas supply methods include high pressure cylinders, liquid mini tanks or bulk storage vessels. A CompAir generator makes the workplace considerably safer for employees, eliminating the safety risks associated with traditional methods. When compared to outsourced supplies, on-site nitrogen generation offers a greater flexibility and has a significant impact on time and costs.
- Enhanced safety without the need to store or handle high pressure cylinders
- Reduced downtime due to an on-demand supply
- Cost savings following payback of up to 90%
- High purity nitrogen at consistent flow and pressure
- Compact space saving design
- Flexible modular design
- Low cost of ownership
- Proven high reliability
Typical Nitrogen Generator Installation
Multi-bank design
Nitrogen generators begin with clean, dry compressed air to create a continuous supply of high purity nitrogen.
The unique multi-bank design (CN2009P to CN2168P) enables additional generators to be added in the future as demand increases and provides redundancy for ease of maintenance. Your CNP Series nitrogen generator can grow with your company. In the diagram above you can see a typical on-site nitrogen gas generation station which uses compressed air.
From left to right in the image above you can see the air compressor (left), air tank to store the compressed air, then dryers & filters to remove water vapour & oil / impurities from the compressed air, then another air tank to store this clean air. The 4 nitrogen generators are shown on the right - they extract the N2 from the compressed air which is stored in the 4 tanks on the right hand side until needed by the process in question.
CompAir Nitrogen Generators - Technical Data
Benefits
What is a Nitrogen Generator and how does it work?
The air we breath is approximately 78 percent nitrogen and 21 percent oxygen, a small amounts of other gases, such as neon, and hydrogen make up the other 1%. A nitrogen generator is able to produce a continuous uninterrupted stream of nitrogen gas from clean dry compressed air. It uses a Carbon Molecular Sieve (CMS) bed where oxygen and other trace gases are preferentially adsorbed and the nitrogen is allowed to pass through.
CompAir nitrogen generators are available in 3 variations
Capacities range from 1 up to 1150 Nm3/hour from 95% to 99.9995% purity. CompAir PSA generators are designed for 24/7 operation. The touchscreen control has user-friendly interface with automatic start/stop function based on gas consumption. Our SEP and MultiSEP series have spring loaded columns which prevent the molecular sieve against a crushing effect.
The unique design provides consistent high flow rates of nitrogen with a minimum footprint. Together with molecular sieve protection from moisture to substantially lower the cost and extend the generators.
The features are your benefits:
- Robust Design with stainless steel piping
- Built-in purity analyser for constant monitoring
- Vessels designed for dynamic pressure loading
- Intuitive touch-screen control
- Remote start/stop relay
- Guaranteed performance with ASSURE warranty & remote monitoring
- Rapid ROI in typically less than 24 months
- Easy to install & environmentally-friendly
- Fits any application
Guaranteed performance
- 100% function and performance factory tested
- ASSURE warranty
Rapid return on investment
- Significant cost savings over cylinder or liquid supply provides a typical return on investment of less than 24 months
- Ecomode energy savings control reduces energy consumption during periods of low demand
Fits any application
- Maximum design operating pressure of 16 barg available design quality
- Mass flow controller - ensures correct application pressure and flow
- Integral oxygen analyser - continuously measures and guarantees gas quality
- Purity guarantee valve - automatically ensures gas meets desired specifications
- Remote monitoring - enables connection to proprietary remote management and generator control systems
The convenient and safe alternative
Nitrogen is used for a wide range of industrial applications including atmosphere packaging for perishable food products. It is also used in preventing fire and explosions in chemical plants. Using high quality compressed air to supply the generators, ensures long and trouble-free service and guarantees optimum performance.
CompAir has a comprehensive range of systems that include everything needed to set up an on-site nitrogen generation system. CompAir air compressors and pre-treatment packages include adsorption dryers and coalescing filters to guarantee the highest quality air supply for the generators. The gas can be produced from your existing system with a minimum of additional floor space.
Typical gas supply methods include high pressure cylinders, liquid mini tanks or bulk storage vessels. A CompAir generator makes the workplace considerably safer for employees, eliminating the safety risks associated with traditional methods. When compared to outsourced supplies, on-site nitrogen generation offers a greater flexibility and has a significant impact on time and costs.
- Enhanced safety without the need to store or handle high pressure cylinders
- Reduced downtime due to an on-demand supply
- Cost savings following payback of up to 90%
- High purity nitrogen at consistent flow and pressure
- Compact space saving design
- Flexible modular design
- Low cost of ownership
- Proven high reliability
Typical Nitrogen Generator Installation
Multi-bank design
Nitrogen generators begin with clean, dry compressed air to create a continuous supply of high purity nitrogen.
The unique multi-bank design (CN2009P to CN2168P) enables additional generators to be added in the future as demand increases and provides redundancy for ease of maintenance. Your CNP Series nitrogen generator can grow with your company. In the diagram above you can see a typical on-site nitrogen gas generation station which uses compressed air.
From left to right in the image above you can see the air compressor (left), air tank to store the compressed air, then dryers & filters to remove water vapour & oil / impurities from the compressed air, then another air tank to store this clean air. The 4 nitrogen generators are shown on the right - they extract the N2 from the compressed air which is stored in the 4 tanks on the right hand side until needed by the process in question.
Technical Data
CompAir Nitrogen Generators - Technical Data