L02 to L06
Flow: 0.18 to 0.95 m³/min
Pressure: 10 bar
Low-noise, fixed speed compressor.
Available as stand alone, receiver mounted and Airstation versions.

L07 to L22
Flow: 0.41 to 3.65 m³/min
Pressure: 7.5 to 13 bar
Fixed & Variable Speed
Fully integrated design with high efficiency airends suitable for most advanced applications.

L23 to L29
Flow: 0.92 to 5.52 m³/min
Pressure: 5 to 13 bar
Fixed & Variable Speed
High output airend screws, highly efficient IE3 electric motor, integrated oil filter and regulation valve offer highest levels of quality.

L30 to L45
Flow: 1.33 to 8.67 m³/min
Pressure: 5 to 13 bar
Fixed & Variable Speed
Configurable to your unique requirements and designed with a larger airend for delivering cutting edge efficiency.

L55 to L75
Flow: 2.20 to 14.72 m³/min
Pressure: 5 to 13 bar
Fixed & Variable Speed
Available with air-cooled and water-cooled options as well as optional heat recovery.

L90 to L132
Flow: 5.3 to 24.5 m³/min
Pressure: 5 to 13 bar
Fixed & Variable Speed
Best-in-class efficiency achieved with a new, premium airend designed by expert engineers.

L160 to L290
Flow: 6 to 47 m³/min
Pressure: 5 to 13 bar
Fixed & Variable Speed
This exciting new range of gear and direct drive compressors delivers up to 12% more compressed air with the same kW motor.

ULTIMA U75 to U160
Pressure: 4 to 10 bar
Flow: 6.7 to 23m³/min
75 to 160kW

Two-stage, oil-free screw compressors, fixed or regulated speed, silicone free and ISO-8573 Class Zero (2010) certified oil-free screw compressors

D37 to D75 Series
Pressure: 7 to 10 bar
Flow: 6 to 12.7m³/min
37 to 75kW

Air and water-cooled, fixed and regulated speed, silicone free and ISO-8573 Class Zero (2010) certified oil-free compressors

DX90 (RS) to DX160 (RS)
Pressure: 4 to 10.5 bar
Flow: 6.7 to 28.3m³/min
90 to 160kW

Two-stage, oil-free screw compressors, fixed or regulated speed, silicone free and ISO-8573 Class Zero (2010) certified oil-free screw compressors

D15H (RS) to D37H
Pressure: 5 to 10 bar
Flow: 0.32 to 5.86m³/min
15 to 37kW

Single-stage, oil-free water-injected screw compressors, fixed or regulated speed, silicone free and ISO-8573 Class Zero (2010) certified oil-free screw compressors

DX200 to DX355 Series
Pressure: 4 to 10 bar
Flow: 11.4 to 53.4m³/min
200 to 355kW

Air and water-cooled, fixed and regulated speed, silicone free and ISO-8573 Class Zero (2010) certified oil-free compressors

Approximately 10% of all electricity used in industry is accounted for by compressed air systems. It is a thermodynamic fact that around 95% of this energy is ...

Compressed air systems typically comprise of multiple compressors delivering air to a common distribution system. The combined capacity of those machines is ...

Electrically driven and speed-controlled: Emission-free, economical, reliable

The new Elec50 compressors combine the familiar features of proven CompAir series with the advantages of an emission-free, extremely quiet and economical electric drive: ideal for use in environmentally or noise-sensitive areas, e.g. in tunnels, narrow excavations or inside buildings.

The powerful alternative to power tools. Portable compressor - only 165 kg operating weight, with a volume flow of 1.0 to 1.4 m / min at 7 to 12 bar. Ideal for a wide range of repair and installation work.

The new, mechanically controlled Yanmar engines offer optimum performance and do not require a diesel particulate filter (DPF) to fulfil the current EU Stage 5 legislation for diesel engines for construction machinery. Noise level. The integration of the oil thermostatic valve as standard improves reliability and operational safety in all conditions.

Thanks to the diesel particulate filter, the extremely smooth-running, water-cooled Yanmar 4-cylinder diesel engines comply with the EU Stage V emissions standard. They are ideal for urban use, where the highest demands are placed on low exhaust and noise emissions. The low operating weight is predestined for use in rental fleets.

This compressor series is characterised by its low diesel consumption, which is 10 % lower than that of its predecessor models. Equipped with a diesel particulate filter and FPM (Flexible Power Management), they comply with the EU Stage V emissions standard. Pressure variants up to 14 bar make this compact series extremely versatile and fulfil the requirements of numerous applications.

Designed for the toughest construction site conditions, this series impresses with its reliability, compressed air quality and ease of servicing and has comparatively above-average standard equipment. The energy-efficient Deutz TCD4.1 L4 diesel engine with electronic injection, diesel particulate filter and FPM (Flexible Power Management) fulfils the EU Stage V emissions standard.

The TurboScrew compressors with their unique bi-turbo technology are characterised by excellent fuel savings, a very low weight of 3,500 kg and highly environmentally friendly performance in accordance with Regulation (EU) 2016/1628 Stage V.

CompAir is a compressed air specialist company and among their products are quality pneumatic hammers, breakers, rock drills and moles.